Fale Conosco Home Quem Somos Cantinho do Cliente Bons Links AsSAuto Onde Incluir em Favoritos Nossa Poltica
30/08/2014
Loja On Line
E-MAIL
MAPA SITE
DUVIDAS
AUTO AERO FERREO NAUTI PLASTI METAL ROBÓTICA AUTORAMA FERRAMENTAS ACESSÓRIOS PROMOÇÕES EDUCAÇÃO & CIÊNCIA USADOS
  PILOTO AUTOMÁTICO PA-2
PILOTO AUTOMÁTICO PA-2
Cod.: futpa-2 | Fabricante: FUTABA |
Preço: R$ 338,80 + Frete

TRATA-SE DE PILOTO AUTOMATICO PARA AEROMODELLOS (NÃO SERVE P/ HELICÓPTEROS). QUANDO OS STICKS (COMANDOS) DO TRANSMISSOR FOREM RELAXADOS AO SEU PONTO NEUTRO O SISTEMA PA-2 AUTOMATICAMENTE RETORNA O AEROMODELO AO NIVEL DE VOO MESMO SE ESTIVER ENTRADO NUM SÉRIO DESIQUILIBRIO CAUSADO PELO VENTO OU POR UM COMANDO DADO ERRONEAMENTE. ISSO SIMPLIFICA O TREINAMENTO E REDUZ POSSIBILIDADE DE QUEDA.



FEATURES: This Is A Horizontal Stabilizer For Model Aircraft and Incorporates

The Latest Sensor Technology.

Operates On A Single Aileron Servo.

Supports two Channels To Level The Wings and Bring Plane To Level

Flight.

Automatically Controls The Elevators and Ailerons, But When The

Modeler Operates A Stick, The Sensitivity Drops According To The

Amount Of Stick Operation and Stick Operation Has Priority.

Sensitivity Can Be Adjusted By Transmitters Having Volume Control-

(At Least 5 Channels and At Least One Extra Channel Is On A Dial.)

(See COMMENTS) Or By The Gain Control On The Amplifier Unit Itself.

Some Radios W/Volume Control Are: SKYSPORT 6VA, 6XA, 7UA, 8UA, 9ZA.

Other Brands Of Radios May Work If They Are Wired Like And Have

Connectors Like Futaba Has.

Servo Reversing Switches Located On Amplifier Unit.



INCLUDES: One Amplifier Unit Pre-Wired with 2-Pin and J Plugs

One Sensor Unit Pre-Wired with 2-Pin Plugs, Nylon Nut and Washer

One Instruction Manual



REQUIRES: Use with a standard Futaba-compatible receiver/radio system



SPECS: Power Requirement: 4.8V (NiCd Battery fed via receiver)

Current Drain: 5mA (at 4.8V) (confirmed 9/99 amc/jquigg)

Amplifier Length: 53.5mm (excluding protruding parts)

Width: 33.5mm

Height: 14.5mm

Weight: 25g

Sensor Diameter: 33mm

Weight: 15g (excluding screws)

COMMENTS: It Is Not Recommended To Fly: On Days When The Sun Is Extremely

Bright or Reflective, Ground Is Snow Covered, Over Water Or Near

Reflective Buildings, or in Very Low Light Conditions (Dusk, etc).

This Unit Only Keeps The Aircraft Level, It Does Not Automatically

Fly The Aircraft From Takeoff To Landing.

Wiring:

From Amp to Sensor: Red/Black & Yellow/Orange w/2-Pin Connectors

From Amp to Rx: Blue J Connector For Elevator

Black J Connector For Aileron

Sensitivity: (Volume Control) Red J Connector For Auxiliary (Used Usually In

Channel 5, And Will Enable The Use Of Transmitter

Volume Control To Change Sensitivity In Flight.

From Rx to Amp: Channel 1 Aileron

Channel 2 Elevator



DIFFERENCES BETWEEN THE OLDER PA1 AND THE PA2:

PA1 had a slot for the second Aileron Servo. Customer must use a

"Y" connector for the second Aileron servo with the PA2.

The Gain on the PA2 can be adjusted directly on the unit itself

and thus does not require a transmitter with Volume control.


IMAGENS E FOTOS MERAMENTE ILUSTRATIVAS. APARÊNCIA, OPERACIONALIDADE E CARACTERÍSTICAS DO PRODUTO DEPENDEM DE COMO ELE É MONTADO OU UTILIZADO PELO USUÁRIO.


RECOMENDE A UM AMIGO
IMAGENS PURAMENTE ILUSTRATIVAS

E VEJA MUITO MAIS CLICANDO ABAIXO SÔBRE O SELINHO  DA ÁREA DO SEU INTERESSE!!!

AUTO AERO FERREO NAUTI PLASTI METAL ROBÓTICA AUTORAMA FERRAMENTAS ACESSÓRIOS PROMOÇÕES EDUCAÇÃO & CIÊNCIA USADOS

Rua Brigadeiro Tobias, 424 - Sorocaba -SP | Fone/Fax (015) 3233-6054 - veja o mapa
ATENDEMOS DE 2ª Á 6ª FEIRA DAS 8:30 ÀS 18:00hs E AOS DOMINGOS DAS 9 ÁS 15horas
hobbymod@hobbymodelismo.com.br

Desenvolvido Guaru.com